LockGuard for Door

 

 

 

The illustration above shows the 9601UK high security DeadlockGuard on the door and the 9602 FrameGuard on the frame.

 

A Kickstop LockGuard is used to reinforce and strengthen a wooden door around a traditional UK lever, euro profile or oval profile cylinder mortice lock.

Fitting a mortice lock involves removing wood and this leaves a very weakened area around the lock.  The Door Reinforcer plates are bolted together through the door - to resist a 'kick-in' attack and forced entry and so help avoid a burglary.

Part of the LockGuard is fitted to the external face of the door and will provide a very visible indication that the door has been reinforced.  The benefit is that this visual deterrent will help persuade the intruder to 'go elsewhere'

 

Fitting a mortice deadlock, or sashlock, involves removing wood from the door

This leaves a very weakened area around the mortice lock

The Kickstop Door Reinforcer will help remedy this problem

 

The Kickstop LockGuards

The DeadlockGuard is for use with a mortice deadlock

The SashlockGuard is for use with a mortice sashlock 

 

Before ordering

*Very carefully check the type of keyway you require

Traditional UK (UK) - Euro profile cylinder (EU) - Oval cylinder (OV)

 

NB: Choose the device/plate with the correct shape of keyway 

  

 

 

UK

(for traditional lever/detainer mortice deadlock)

 

EU

(for Euro Profile cylinder mortice deadlock)

OV

(for Oval Profile cylinder mortice deadlock)

Mortice deadlocks shown above - for illustration purposes only

 

Euro Cylinder 

 Oval Cylinder

 

 

Mortice deadlock cylinders shown above  - for illustration purposes only

 

9600UK DeadlockGuard

for Mortice Deadlock

188 x 35 x 7mm

9600EU DeadlockGuard

for Mortice Deadlock

188 x 35 x 7mm

9600OV DeadlockGuard

for Mortice Deadlock

188 x 35 x 7mm

 

 

 

 

2000UK DeadlockGuard

for Mortice Deadlock

203 x 50 x 3mm

2000EU DeadlockGuard

for Mortice Deadlock

203 x 50 x 3mm

2000OV DeadlockGuard

for Mortice Deadlock

203 x 50 x 3mm

 

 

 

 

9601UK DeadlockGuard

for Mortice Deadlock

300 x 35 x 7mm

9601EU DeadlockGuard

for Mortice Deadlock

300 x 35 x 7mm

9601OV DeadlockGuard

for Mortice Deadlock

300 x 29 x 7mm

 

 

 

9619 SashlockGuard

For Mortice Sashlock

240 x 75 x 3mm

The top elongated hole is for the spindle

The lower 'universal' hole is for the UK keyway,

Euro cylinder or Oval cylinder.

To be used with customers own lever lock furniture

2001 HingeGuard

For Hinge on Door

203 x 50 x 3mm

For use where a much higher level

of additional security is required

 

BUY DeadlockGuard - BUY SashlockGuard

 

Tel: 01536 790999    Fax: 01536 790710    E-mail: info@doorguard.co.uk

 

Online B2B shop powered by Security Matters