Anti-Thrust Devices for Door

Anti-thrust plate is Locksmith terminology for a flat plate that is fitted to the external face of a door:

  • It overlaps the edge of the door and covers the gap between the door and frame to prevent someone using an implement to tamper with the latch or bolt.
  • All Kickstop Anti-Thrust Plates are made from 3mm thick steel with countersunk fixing holes
  • All Kickstop Anti-Thrust plates are supplied with Sentinel countersunk security screws
  • All Kickstop Anti-ThrustGuards are supplied with security bolt fixings

NB: Because the plate overlaps the edge of the door, it would be fitted to a pair of doors or a single door that opens outward.

NB: For the same reason, if it is fitted to double doors that open inward, it cannot be fitted to the door that opens first.

Kickstop supplies high security Anti-Thrust Plates and very high security Anti-ThrustGuards and a complete list and description is provided below.

 Before ordering

*Very carefully check the type of keyway you require

Traditional UK (UK) - Euro profile cylinder (EU) - Oval cylinder (OV)

 

NB: Choose the device/plate with the correct shape of keyway 

  

Anti-Thrust Devices to provide anti-jemmy protection for mortice deadlocks and latches

AT1UK , 2021UK, AT1EU, 2021EU, AT1OV, 2021OV

 

 

 

UK

(for traditional lever/detainer mortice deadlock)

 

EU

(for Euro Profile cylinder mortice deadlock)

OV

(for Oval Profile cylinder mortice deadlock)

Mortice deadlocks shown above - for illustration purposes only

 

Euro Cylinder 

 Oval Cylinder

 

 

Mortice deadlock cylinders shown above  - for illustration purposes only

 

AT1UK

203 x 100 x 3mm

Reversible - NOT Handed

(Countersunk Both Sides)

 AT1EU

203 x 100 x 3mm 

Reversible - NOT Handed

(Countersunk Both Sides)

AT1OV

203 x 100 x 3mm 

Reversible - NOT Handed

(Countersunk Both Sides)

2021UK

203 x 100/50 x 3mm 

Reversible - NOT Handed

(Finished Both Sides) 

2021EU

203 x 100/50 x 3mm 

Reversible - NOT Handed

(Finished Both Sides)

2021OV

203 x 100/50 x 3mm 

Reversible - NOT Handed

(Finished Both Sides)

 

Anti-Thrust Plate to provide anti-jemmy protection for Euro cylinder rimlocks

AT3EU

 

AT3EU

230 x 100 x 3mm 

Reversible - NOT Handed

(Countersunk Both Sides)

 

Anti-Thrust Devices to provide anti-jemmy protection for mortice sashlocks

AT5, 2025

With 'Universal' elongated hole for use with UK Keyway, Euro and Oval profile cylinder

For use with customers own lever lock furniture

 

AT5

240 x 100 x 3mm

The top elongated hole is for the spindle

The lower 'universal' hole is for the UK keyway, Euro cylinder or Oval cylinder

Reversible - NOT Handed

(Countersunk Both Sides) 

2025

240 x 100/75 x 3mm

The top elongated hole is for the spindle

The lower 'universal' hole is for the UK keyway, Euro cylinder or Oval cylinder

Reversible - NOT Handed

(Finished Both Sides) 

 

Anti-Thrust Device to provide anti-jemmy protection for cylinder rimlocks

AT6

 

AT6

203 x 120 x 3mm 

Hole for cylinder is 47.5mm in diameter

Reversible - NOT Handed

 

Anti-Thrust devices to provide anti jemmy protection for single or double doors - with no keyway

AT1, AT2, AT4

 

AT1

203 x 100 x 3mm 

Reversible - NOT Handed

AT2

480 x 80 x 3mm - 5 screws

Reversible - NOT Handed

AT4

1980 x 80 x 3mm - 19 screws

Reversible - NOT Handed

 

BUY Anti-Thrust Plate - Screw on plate (Sentinel security screws supplied)

BUY Anti-ThrustGuard - Bolt through plates (security fixings supplied)

 

Tel: 01536 790999   E-mail: info@doorguard.co.uk

Online B2B shop powered by Security Matters

 

Kickstop Anti-Thrust Plate - Traditional UK Keyway

Kickstop
Product Code: AT1UK
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code: AT1UK
  • For Outward Opening Door or Double Doors
  • Steel Plate with UK KEYWAY
  • Reversible - Not Handed
  • 100mm wide
  • For Mortice Deadlock or Latch
  • To Overlap and cover gap between Door and Frame
  • Included - Sentinel Countersunk Security Screws

AT1UK dimensions - 203mm long x 100mm wide x 3mm thick -

Four Countersunk Holes

This is the screw on version of the 2021 UK

Not Handed - Reversible Plate (countersunk both sides)

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

Kickstop Anti-Thrust Plate - Euro Profile Keyway

Kickstop
Product Code: AT1EU
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code: AT1EU
  • For Outward Opening Door or Double Doors
  • Steel Plate with EURO KEYWAY
  • Reversible - Not Handed
  • 100mm wide
  • For Mortice Deadlock or Latch
  • To Overlap and cover gap between Door and Frame
  • Included - Sentinel Countersunk Security Screws

AT1EU dimensions - 203mm long x 100mm wide x 3mm thick -

Four Countersunk Holes

This is the screw on version of the 2021 EU

Not Handed - Reversible Plate (countersunk both sides)

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

 

Kickstop Anti-Thrust Plate - Euro Profile Keyway

Kickstop
Product Code: AT3EU
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code AT3EU
  • For Outward Opening Door or Double Doors
  • Steel Plate with EURO KEYWAY
  • Reversible - Not Handed
  • 100mm wide
  • For Mortice Deadlock or Latch
  • To Overlap and cover gap between Door and Frame
  • Included - Sentinel Countersunk Security Screws

AT1EU dimensions - 280mm long x 100mm wide x 3mm thick -

Four Countersunk Holes

Not Handed - Reversible Plate (countersunk both sides)

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

 

Kickstop Anti-Thrust Plate - Oval Profile Keyway

Kickstop
Product Code: AT1OV
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code AT1OV
  • For Outward Opening Door or Double Doors
  • Steel Plate with OVAL KEYWAY
  • Reversible - Not Handed
  • 100mm wide
  • For Mortice Deadlock or Latch
  • To Overlap and cover gap between Door and Frame
  • Included - Sentinel Countersunk Security Screws

AT1OV dimensions - 203mm long x 100mm wide x 3mm thick -

Four Countersunk Holes

Not Handed - Reversible Plate (countersunk both sides)

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

 

To reinforce a wooden door frame fitted with a surface mounted rim lock or nightlatch. Traditional wooden door frames will splinter and split open during a forced attack. A burglary victim, following a 'kick in' attack, would often find that the door frame and rim lock security had not been able to resist the attack and had failed. To counter this problem, the police and other crime prevention specialists very highly recommend the London Bar to strengthen and reinforce the door frame and fit over the rim lock or cylinder nightlatch. It is easy to fit, is used with existing locks and provides extremely effective additional security every time the door is closed and locked. packet of 2 1/2" long, No. 10 hardened steel woodscrews is supplied. The Kickstop London Bar is a door frame reinforcing solid steel bar with a 'D' shaped staple to fit over the staple (keep) of a surface fitted rim lock or cylinder nightlatch. This very effective steel anti-burglary device is screwed on to the internal face of the lock side of the frame and will resist the kicking, splitting and forcing open of the door5mm thick solid steel bar with a rounded edge and countersunk holes24" (610mm), 72" (1830mm) or 78" (1980mm) long5/8" (16mm) or 3/4" (20mm) wideStandard (30x70mm) , Large (30x97mm), Extra Large (40x105mm), Universal (30x70-97mm) or Ingersoll SC71 (modified 30x70mm) staple sizeNB: The staple of the London Bar (the 'D' shaped part) is available in three main sizes. Standard, Large and Extra Large. The purchaser must be aware that there are 100's of rim lock and nightlatch staple shapes and sizes in use in and the London Bar Staple is only designed to fit over the lock staple and is not designed to provide a contour hugging tight fit.NB: The London Bar staple has to fit OVER the surface mounted rim lock staple (keep) - the part of the rim lock that is screwed onto the frame. Take correct measurements in order to choose the appropriate London Bar staple size and avoid one that is too small.The Universal size staple is designed for customers who are not sure whether to purchase a Standard or Large size. A traditional Style Standard Yale 77 Nightlatch is shown for illustration purposes only The Staple (or the keep) is the metal part of the rim lock or nightlatch that is screwed onto the door frame 9612 & 9613 Ingersoll StapleThis is a 'handed' 30mm x 70mm London Bar staple used with the Ingersoll SC71 rim lock.It will fit over the lock staple and has a small cut out section to allow the springbolt of the lock to pass through.The product code 9612 is for a 'left handed' fitting and the 9613 is for a 'right handed' fitting.NB: From inside the property on an inward opening door - a 'right hand fitting' is where the lock is fitted on the left hand side. The door would then be unlocked and opened inwards - using the right hand. An Ingersoll SC71 Nightlatch is shown for illustration purposes only NB: Rim locks and nightlatches are fitted at slightly different heights on individual doors. When fitting the 72" and 78" length London Bars, a little of the top or the bottom of the London Bar will probably need to be removed when fitting. The surplus can be cut off with a hacksaw.The 'D' shaped bend in the two longer London Bars is positioned at the approximate height of where most surface mounted nightlatches should normally be fitted.The 72" bar is approximately 6" shorter than the height of a door frame - to help avoid the need to hacksaw off a piece of the bar if Tower bolts, other sliding bolts or fittings are fitted at top or bottom.

Kickstop Anti-Thrust Plate - No Keyway

Kickstop
Product Code: AT1
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code: AT1
  • For Outward Opening Door or Double Doors
  • Steel Plate with NO KEYWAY
  • Reversible - Not Handed
  • 100mm wide
  • For Mortice Deadlock or Latch
  • To Overlap and cover gap between Door and Frame
  • Included - Sentinel Countersunk Security Screws

AT1 dimensions - 203mm long x 100mm wide x 3mm thick -

Four Countersunk Holes

Not Handed - Reversible Plate (countersunk both sides)

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

To reinforce a wooden door frame fitted with a surface mounted rim lock or nightlatch. Traditional wooden door frames will splinter and split open during a forced attack. A burglary victim, following a 'kick in' attack, would often find that the door frame and rim lock security had not been able to resist the attack and had failed. To counter this problem, the police and other crime prevention specialists very highly recommend the London Bar to strengthen and reinforce the door frame and fit over the rim lock or cylinder nightlatch. It is easy to fit, is used with existing locks and provides extremely effective additional security every time the door is closed and locked. packet of 2 1/2" long, No. 10 hardened steel woodscrews is supplied. The Kickstop London Bar is a door frame reinforcing solid steel bar with a 'D' shaped staple to fit over the staple (keep) of a surface fitted rim lock or cylinder nightlatch. This very effective steel anti-burglary device is screwed on to the internal face of the lock side of the frame and will resist the kicking, splitting and forcing open of the door5mm thick solid steel bar with a rounded edge and countersunk holes24" (610mm), 72" (1830mm) or 78" (1980mm) long5/8" (16mm) or 3/4" (20mm) wideStandard (30x70mm) , Large (30x97mm), Extra Large (40x105mm), Universal (30x70-97mm) or Ingersoll SC71 (modified 30x70mm) staple sizeNB: The staple of the London Bar (the 'D' shaped part) is available in three main sizes. Standard, Large and Extra Large. The purchaser must be aware that there are 100's of rim lock and nightlatch staple shapes and sizes in use in and the London Bar Staple is only designed to fit over the lock staple and is not designed to provide a contour hugging tight fit.NB: The London Bar staple has to fit OVER the surface mounted rim lock staple (keep) - the part of the rim lock that is screwed onto the frame. Take correct measurements in order to choose the appropriate London Bar staple size and avoid one that is too small.The Universal size staple is designed for customers who are not sure whether to purchase a Standard or Large size. A traditional Style Standard Yale 77 Nightlatch is shown for illustration purposes only The Staple (or the keep) is the metal part of the rim lock or nightlatch that is screwed onto the door frame 9612 & 9613 Ingersoll StapleThis is a 'handed' 30mm x 70mm London Bar staple used with the Ingersoll SC71 rim lock.It will fit over the lock staple and has a small cut out section to allow the springbolt of the lock to pass through.The product code 9612 is for a 'left handed' fitting and the 9613 is for a 'right handed' fitting.NB: From inside the property on an inward opening door - a 'right hand fitting' is where the lock is fitted on the left hand side. The door would then be unlocked and opened inwards - using the right hand. An Ingersoll SC71 Nightlatch is shown for illustration purposes only NB: Rim locks and nightlatches are fitted at slightly different heights on individual doors. When fitting the 72" and 78" length London Bars, a little of the top or the bottom of the London Bar will probably need to be removed when fitting. The surplus can be cut off with a hacksaw.The 'D' shaped bend in the two longer London Bars is positioned at the approximate height of where most surface mounted nightlatches should normally be fitted.The 72" bar is approximately 6" shorter than the height of a door frame - to help avoid the need to hacksaw off a piece of the bar if Tower bolts, other sliding bolts or fittings are fitted at top or bottom.

Kickstop Anti-Thrust Plate - No Keyway

Kickstop
Product Code: AT2
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code: AT2
  • For Outward Opening Door or Double Doors
  • Large Steel Plate with NO KEYWAY
  • Reversible - Not Handed
  • 80mm wide'1/4' Door Height
  • To Overlap and cover gap between Door and Frame
  • Included - Sentinel Countersunk Security Screws

AT2 dimensions - 480mm long x 80mm wide x 3mm thick -

Five Countersunk Holes - Not Handed

This is the much shorter version of the AT4

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

To reinforce a wooden door frame fitted with a surface mounted rim lock or nightlatch. Traditional wooden door frames will splinter and split open during a forced attack. A burglary victim, following a 'kick in' attack, would often find that the door frame and rim lock security had not been able to resist the attack and had failed. To counter this problem, the police and other crime prevention specialists very highly recommend the London Bar to strengthen and reinforce the door frame and fit over the rim lock or cylinder nightlatch. It is easy to fit, is used with existing locks and provides extremely effective additional security every time the door is closed and locked. packet of 2 1/2" long, No. 10 hardened steel woodscrews is supplied. The Kickstop London Bar is a door frame reinforcing solid steel bar with a 'D' shaped staple to fit over the staple (keep) of a surface fitted rim lock or cylinder nightlatch. This very effective steel anti-burglary device is screwed on to the internal face of the lock side of the frame and will resist the kicking, splitting and forcing open of the door5mm thick solid steel bar with a rounded edge and countersunk holes24" (610mm), 72" (1830mm) or 78" (1980mm) long5/8" (16mm) or 3/4" (20mm) wideStandard (30x70mm) , Large (30x97mm), Extra Large (40x105mm), Universal (30x70-97mm) or Ingersoll SC71 (modified 30x70mm) staple sizeNB: The staple of the London Bar (the 'D' shaped part) is available in three main sizes. Standard, Large and Extra Large. The purchaser must be aware that there are 100's of rim lock and nightlatch staple shapes and sizes in use in and the London Bar Staple is only designed to fit over the lock staple and is not designed to provide a contour hugging tight fit.NB: The London Bar staple has to fit OVER the surface mounted rim lock staple (keep) - the part of the rim lock that is screwed onto the frame. Take correct measurements in order to choose the appropriate London Bar staple size and avoid one that is too small.The Universal size staple is designed for customers who are not sure whether to purchase a Standard or Large size. A traditional Style Standard Yale 77 Nightlatch is shown for illustration purposes only The Staple (or the keep) is the metal part of the rim lock or nightlatch that is screwed onto the door frame 9612 & 9613 Ingersoll StapleThis is a 'handed' 30mm x 70mm London Bar staple used with the Ingersoll SC71 rim lock.It will fit over the lock staple and has a small cut out section to allow the springbolt of the lock to pass through.The product code 9612 is for a 'left handed' fitting and the 9613 is for a 'right handed' fitting.NB: From inside the property on an inward opening door - a 'right hand fitting' is where the lock is fitted on the left hand side. The door would then be unlocked and opened inwards - using the right hand. An Ingersoll SC71 Nightlatch is shown for illustration purposes only NB: Rim locks and nightlatches are fitted at slightly different heights on individual doors. When fitting the 72" and 78" length London Bars, a little of the top or the bottom of the London Bar will probably need to be removed when fitting. The surplus can be cut off with a hacksaw.The 'D' shaped bend in the two longer London Bars is positioned at the approximate height of where most surface mounted nightlatches should normally be fitted.The 72" bar is approximately 6" shorter than the height of a door frame - to help avoid the need to hacksaw off a piece of the bar if Tower bolts, other sliding bolts or fittings are fitted at top or bottom.

Kickstop Anti-Thrust Plate - AT4

Kickstop
Product Code: AT4
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code: AT4
  • For Outward Opening Door or Double Doors
  • Very Large Steel Plate with NO KEYWAY
  • Reversible - Not Handed
  • 80mm wide
  • Full Door Height
  • To Overlap and cover gap between Door and Frame
  • Supplied with Sentinel countersunk security screws

AT4 dimensions - 1980mm long x 80mm wide x 3mm thick -

19 Countersunk Holes -  Not Handed

This is the much longer version of the AT2

(Illustration is of AT2 @ 480mm - the AT4 is far too long to illustrate on this page @ 1980mm)

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

To reinforce a wooden door frame fitted with a surface mounted rim lock or nightlatch. Traditional wooden door frames will splinter and split open during a forced attack. A burglary victim, following a 'kick in' attack, would often find that the door frame and rim lock security had not been able to resist the attack and had failed. To counter this problem, the police and other crime prevention specialists very highly recommend the London Bar to strengthen and reinforce the door frame and fit over the rim lock or cylinder nightlatch. It is easy to fit, is used with existing locks and provides extremely effective additional security every time the door is closed and locked. packet of 2 1/2" long, No. 10 hardened steel woodscrews is supplied. The Kickstop London Bar is a door frame reinforcing solid steel bar with a 'D' shaped staple to fit over the staple (keep) of a surface fitted rim lock or cylinder nightlatch. This very effective steel anti-burglary device is screwed on to the internal face of the lock side of the frame and will resist the kicking, splitting and forcing open of the door5mm thick solid steel bar with a rounded edge and countersunk holes24" (610mm), 72" (1830mm) or 78" (1980mm) long5/8" (16mm) or 3/4" (20mm) wideStandard (30x70mm) , Large (30x97mm), Extra Large (40x105mm), Universal (30x70-97mm) or Ingersoll SC71 (modified 30x70mm) staple sizeNB: The staple of the London Bar (the 'D' shaped part) is available in three main sizes. Standard, Large and Extra Large. The purchaser must be aware that there are 100's of rim lock and nightlatch staple shapes and sizes in use in and the London Bar Staple is only designed to fit over the lock staple and is not designed to provide a contour hugging tight fit.NB: The London Bar staple has to fit OVER the surface mounted rim lock staple (keep) - the part of the rim lock that is screwed onto the frame. Take correct measurements in order to choose the appropriate London Bar staple size and avoid one that is too small.The Universal size staple is designed for customers who are not sure whether to purchase a Standard or Large size. A traditional Style Standard Yale 77 Nightlatch is shown for illustration purposes only The Staple (or the keep) is the metal part of the rim lock or nightlatch that is screwed onto the door frame 9612 & 9613 Ingersoll StapleThis is a 'handed' 30mm x 70mm London Bar staple used with the Ingersoll SC71 rim lock.It will fit over the lock staple and has a small cut out section to allow the springbolt of the lock to pass through.The product code 9612 is for a 'left handed' fitting and the 9613 is for a 'right handed' fitting.NB: From inside the property on an inward opening door - a 'right hand fitting' is where the lock is fitted on the left hand side. The door would then be unlocked and opened inwards - using the right hand. An Ingersoll SC71 Nightlatch is shown for illustration purposes only NB: Rim locks and nightlatches are fitted at slightly different heights on individual doors. When fitting the 72" and 78" length London Bars, a little of the top or the bottom of the London Bar will probably need to be removed when fitting. The surplus can be cut off with a hacksaw.The 'D' shaped bend in the two longer London Bars is positioned at the approximate height of where most surface mounted nightlatches should normally be fitted.The 72" bar is approximately 6" shorter than the height of a door frame - to help avoid the need to hacksaw off a piece of the bar if Tower bolts, other sliding bolts or fittings are fitted at top or bottom.

Kickstop Anti-Thrust Plate - AT5

Kickstop
Product Code: AT5
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code: AT5
  • For Outward Opening Door or Double Doors
  • Steel Plate with UNIVERSAL KEYWAY
  • Reversible - Not Handed
  • 100mm wide
  • For Mortice Sashlock - use with own lever lock furniture
  • To Overlap and cover gap between Door and Frame
  • For Outward Opening Doors
  • Supplied with Sentinel countersunk security screws

AT5 dimensions - 240mm long x 100mm wide x 3mm thick -

Four Countersunk Holes

This is the screw on version of the 2025

Not Handed - Reversible Plate (countersunk both sides)

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

 

To reinforce a wooden door frame fitted with a surface mounted rim lock or nightlatch. Traditional wooden door frames will splinter and split open during a forced attack. A burglary victim, following a 'kick in' attack, would often find that the door frame and rim lock security had not been able to resist the attack and had failed. To counter this problem, the police and other crime prevention specialists very highly recommend the London Bar to strengthen and reinforce the door frame and fit over the rim lock or cylinder nightlatch. It is easy to fit, is used with existing locks and provides extremely effective additional security every time the door is closed and locked. packet of 2 1/2" long, No. 10 hardened steel woodscrews is supplied. The Kickstop London Bar is a door frame reinforcing solid steel bar with a 'D' shaped staple to fit over the staple (keep) of a surface fitted rim lock or cylinder nightlatch. This very effective steel anti-burglary device is screwed on to the internal face of the lock side of the frame and will resist the kicking, splitting and forcing open of the door5mm thick solid steel bar with a rounded edge and countersunk holes24" (610mm), 72" (1830mm) or 78" (1980mm) long5/8" (16mm) or 3/4" (20mm) wideStandard (30x70mm) , Large (30x97mm), Extra Large (40x105mm), Universal (30x70-97mm) or Ingersoll SC71 (modified 30x70mm) staple sizeNB: The staple of the London Bar (the 'D' shaped part) is available in three main sizes. Standard, Large and Extra Large. The purchaser must be aware that there are 100's of rim lock and nightlatch staple shapes and sizes in use in and the London Bar Staple is only designed to fit over the lock staple and is not designed to provide a contour hugging tight fit.NB: The London Bar staple has to fit OVER the surface mounted rim lock staple (keep) - the part of the rim lock that is screwed onto the frame. Take correct measurements in order to choose the appropriate London Bar staple size and avoid one that is too small.The Universal size staple is designed for customers who are not sure whether to purchase a Standard or Large size. A traditional Style Standard Yale 77 Nightlatch is shown for illustration purposes only The Staple (or the keep) is the metal part of the rim lock or nightlatch that is screwed onto the door frame 9612 & 9613 Ingersoll StapleThis is a 'handed' 30mm x 70mm London Bar staple used with the Ingersoll SC71 rim lock.It will fit over the lock staple and has a small cut out section to allow the springbolt of the lock to pass through.The product code 9612 is for a 'left handed' fitting and the 9613 is for a 'right handed' fitting.NB: From inside the property on an inward opening door - a 'right hand fitting' is where the lock is fitted on the left hand side. The door would then be unlocked and opened inwards - using the right hand. An Ingersoll SC71 Nightlatch is shown for illustration purposes only NB: Rim locks and nightlatches are fitted at slightly different heights on individual doors. When fitting the 72" and 78" length London Bars, a little of the top or the bottom of the London Bar will probably need to be removed when fitting. The surplus can be cut off with a hacksaw.The 'D' shaped bend in the two longer London Bars is positioned at the approximate height of where most surface mounted nightlatches should normally be fitted.The 72" bar is approximately 6" shorter than the height of a door frame - to help avoid the need to hacksaw off a piece of the bar if Tower bolts, other sliding bolts or fittings are fitted at top or bottom.

Kickstop Anti-Thrust Plate - AT6

Kickstop
Product Code: AT6
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code: AT6
  • For Outward Opening Door or Double Doors
  • Steel Plate for up to 47.5mm Diameter cylinder
  • Reversible - Not Handed
  • 120mm wide
  • For Cylinder Rim Lock
  • To Overlap and cover gap between Door and Frame
  • Included - Sentinel Countersunk Security Screws

AT6 dimensions - 203mm long x 120mm wide x 3mm thick -

Four Countersunk Holes - Not Handed

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

To reinforce a wooden door frame fitted with a surface mounted rim lock or nightlatch. Traditional wooden door frames will splinter and split open during a forced attack. A burglary victim, following a 'kick in' attack, would often find that the door frame and rim lock security had not been able to resist the attack and had failed. To counter this problem, the police and other crime prevention specialists very highly recommend the London Bar to strengthen and reinforce the door frame and fit over the rim lock or cylinder nightlatch. It is easy to fit, is used with existing locks and provides extremely effective additional security every time the door is closed and locked. packet of 2 1/2" long, No. 10 hardened steel woodscrews is supplied. The Kickstop London Bar is a door frame reinforcing solid steel bar with a 'D' shaped staple to fit over the staple (keep) of a surface fitted rim lock or cylinder nightlatch. This very effective steel anti-burglary device is screwed on to the internal face of the lock side of the frame and will resist the kicking, splitting and forcing open of the door5mm thick solid steel bar with a rounded edge and countersunk holes24" (610mm), 72" (1830mm) or 78" (1980mm) long5/8" (16mm) or 3/4" (20mm) wideStandard (30x70mm) , Large (30x97mm), Extra Large (40x105mm), Universal (30x70-97mm) or Ingersoll SC71 (modified 30x70mm) staple sizeNB: The staple of the London Bar (the 'D' shaped part) is available in three main sizes. Standard, Large and Extra Large. The purchaser must be aware that there are 100's of rim lock and nightlatch staple shapes and sizes in use in and the London Bar Staple is only designed to fit over the lock staple and is not designed to provide a contour hugging tight fit.NB: The London Bar staple has to fit OVER the surface mounted rim lock staple (keep) - the part of the rim lock that is screwed onto the frame. Take correct measurements in order to choose the appropriate London Bar staple size and avoid one that is too small.The Universal size staple is designed for customers who are not sure whether to purchase a Standard or Large size. A traditional Style Standard Yale 77 Nightlatch is shown for illustration purposes only The Staple (or the keep) is the metal part of the rim lock or nightlatch that is screwed onto the door frame 9612 & 9613 Ingersoll StapleThis is a 'handed' 30mm x 70mm London Bar staple used with the Ingersoll SC71 rim lock.It will fit over the lock staple and has a small cut out section to allow the springbolt of the lock to pass through.The product code 9612 is for a 'left handed' fitting and the 9613 is for a 'right handed' fitting.NB: From inside the property on an inward opening door - a 'right hand fitting' is where the lock is fitted on the left hand side. The door would then be unlocked and opened inwards - using the right hand. An Ingersoll SC71 Nightlatch is shown for illustration purposes only NB: Rim locks and nightlatches are fitted at slightly different heights on individual doors. When fitting the 72" and 78" length London Bars, a little of the top or the bottom of the London Bar will probably need to be removed when fitting. The surplus can be cut off with a hacksaw.The 'D' shaped bend in the two longer London Bars is positioned at the approximate height of where most surface mounted nightlatches should normally be fitted.The 72" bar is approximately 6" shorter than the height of a door frame - to help avoid the need to hacksaw off a piece of the bar if Tower bolts, other sliding bolts or fittings are fitted at top or bottom.

Kickstop Anti-ThrustGuard - Traditional UK Keyway

Kickstop
Product Code: 2021UK
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code: 2021UK
  • High Security
  • For Outward Opening Door or Double Doors
  • Two Steel Plates with UK KEYWAY
  • 100mm & 50mm wide
  • For UK Lever Mortice Deadlock or Latch
  • To Overlap and cover gap between Door and Frame

2021UK dimensions - 203mm long x 100/50mm wide x 3mm thick  + two security bolts

This is the bolt through higher security version of the AT1 UK

Not Handed - Reversible External Plate

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

To reinforce a wooden door frame fitted with a surface mounted rim lock or nightlatch. Traditional wooden door frames will splinter and split open during a forced attack. A burglary victim, following a 'kick in' attack, would often find that the door frame and rim lock security had not been able to resist the attack and had failed. To counter this problem, the police and other crime prevention specialists very highly recommend the London Bar to strengthen and reinforce the door frame and fit over the rim lock or cylinder nightlatch. It is easy to fit, is used with existing locks and provides extremely effective additional security every time the door is closed and locked. packet of 2 1/2" long, No. 10 hardened steel woodscrews is supplied. The Kickstop London Bar is a door frame reinforcing solid steel bar with a 'D' shaped staple to fit over the staple (keep) of a surface fitted rim lock or cylinder nightlatch. This very effective steel anti-burglary device is screwed on to the internal face of the lock side of the frame and will resist the kicking, splitting and forcing open of the door5mm thick solid steel bar with a rounded edge and countersunk holes24" (610mm), 72" (1830mm) or 78" (1980mm) long5/8" (16mm) or 3/4" (20mm) wideStandard (30x70mm) , Large (30x97mm), Extra Large (40x105mm), Universal (30x70-97mm) or Ingersoll SC71 (modified 30x70mm) staple sizeNB: The staple of the London Bar (the 'D' shaped part) is available in three main sizes. Standard, Large and Extra Large. The purchaser must be aware that there are 100's of rim lock and nightlatch staple shapes and sizes in use in and the London Bar Staple is only designed to fit over the lock staple and is not designed to provide a contour hugging tight fit.NB: The London Bar staple has to fit OVER the surface mounted rim lock staple (keep) - the part of the rim lock that is screwed onto the frame. Take correct measurements in order to choose the appropriate London Bar staple size and avoid one that is too small.The Universal size staple is designed for customers who are not sure whether to purchase a Standard or Large size. A traditional Style Standard Yale 77 Nightlatch is shown for illustration purposes only The Staple (or the keep) is the metal part of the rim lock or nightlatch that is screwed onto the door frame 9612 & 9613 Ingersoll StapleThis is a 'handed' 30mm x 70mm London Bar staple used with the Ingersoll SC71 rim lock.It will fit over the lock staple and has a small cut out section to allow the springbolt of the lock to pass through.The product code 9612 is for a 'left handed' fitting and the 9613 is for a 'right handed' fitting.NB: From inside the property on an inward opening door - a 'right hand fitting' is where the lock is fitted on the left hand side. The door would then be unlocked and opened inwards - using the right hand. An Ingersoll SC71 Nightlatch is shown for illustration purposes only NB: Rim locks and nightlatches are fitted at slightly different heights on individual doors. When fitting the 72" and 78" length London Bars, a little of the top or the bottom of the London Bar will probably need to be removed when fitting. The surplus can be cut off with a hacksaw.The 'D' shaped bend in the two longer London Bars is positioned at the approximate height of where most surface mounted nightlatches should normally be fitted.The 72" bar is approximately 6" shorter than the height of a door frame - to help avoid the need to hacksaw off a piece of the bar if Tower bolts, other sliding bolts or fittings are fitted at top or bottom.

Kickstop Anti-ThrustGuard - Euro Profile Keyway

Kickstop
Product Code: 2021EU
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code: 2021EU
  • High Security
  • For Outward Opening Door or Double Doors

2021EU plate dimensions - 203mm long x 100/50mm wide x 3mm thick + two security bolts

This is the bolt through higher security version of the AT1 EU

Not Handed - Reversible External Plate

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

To reinforce a wooden door frame fitted with a surface mounted rim lock or nightlatch. Traditional wooden door frames will splinter and split open during a forced attack. A burglary victim, following a 'kick in' attack, would often find that the door frame and rim lock security had not been able to resist the attack and had failed. To counter this problem, the police and other crime prevention specialists very highly recommend the London Bar to strengthen and reinforce the door frame and fit over the rim lock or cylinder nightlatch. It is easy to fit, is used with existing locks and provides extremely effective additional security every time the door is closed and locked. packet of 2 1/2" long, No. 10 hardened steel woodscrews is supplied. The Kickstop London Bar is a door frame reinforcing solid steel bar with a 'D' shaped staple to fit over the staple (keep) of a surface fitted rim lock or cylinder nightlatch. This very effective steel anti-burglary device is screwed on to the internal face of the lock side of the frame and will resist the kicking, splitting and forcing open of the door5mm thick solid steel bar with a rounded edge and countersunk holes24" (610mm), 72" (1830mm) or 78" (1980mm) long5/8" (16mm) or 3/4" (20mm) wideStandard (30x70mm) , Large (30x97mm), Extra Large (40x105mm), Universal (30x70-97mm) or Ingersoll SC71 (modified 30x70mm) staple sizeNB: The staple of the London Bar (the 'D' shaped part) is available in three main sizes. Standard, Large and Extra Large. The purchaser must be aware that there are 100's of rim lock and nightlatch staple shapes and sizes in use in and the London Bar Staple is only designed to fit over the lock staple and is not designed to provide a contour hugging tight fit.NB: The London Bar staple has to fit OVER the surface mounted rim lock staple (keep) - the part of the rim lock that is screwed onto the frame. Take correct measurements in order to choose the appropriate London Bar staple size and avoid one that is too small.The Universal size staple is designed for customers who are not sure whether to purchase a Standard or Large size. A traditional Style Standard Yale 77 Nightlatch is shown for illustration purposes only The Staple (or the keep) is the metal part of the rim lock or nightlatch that is screwed onto the door frame 9612 & 9613 Ingersoll StapleThis is a 'handed' 30mm x 70mm London Bar staple used with the Ingersoll SC71 rim lock.It will fit over the lock staple and has a small cut out section to allow the springbolt of the lock to pass through.The product code 9612 is for a 'left handed' fitting and the 9613 is for a 'right handed' fitting.NB: From inside the property on an inward opening door - a 'right hand fitting' is where the lock is fitted on the left hand side. The door would then be unlocked and opened inwards - using the right hand. An Ingersoll SC71 Nightlatch is shown for illustration purposes only NB: Rim locks and nightlatches are fitted at slightly different heights on individual doors. When fitting the 72" and 78" length London Bars, a little of the top or the bottom of the London Bar will probably need to be removed when fitting. The surplus can be cut off with a hacksaw.The 'D' shaped bend in the two longer London Bars is positioned at the approximate height of where most surface mounted nightlatches should normally be fitted.The 72" bar is approximately 6" shorter than the height of a door frame - to help avoid the need to hacksaw off a piece of the bar if Tower bolts, other sliding bolts or fittings are fitted at top or bottom.

Kickstop Anti-ThrustGuard - Oval Profile Keyway

Kickstop
Product Code: 2021OV
Discount Applied Automatically
Add to cart
  • Description
  • Related Products
  • Code: 2021OV
  • High Security
  • For Outward Opening Door or Double Doors
  • Two Steel Plates with OVAL KEYWAY
  • 100mm & 50mm wide
  • For Oval Profile Cylinder Mortice Deadlock or Latch
  • To Overlap and cover gap between Door and Frame

2021OV plate dimensions - 203mm long x 100/50mm wide x 3mm thick  + two security bolts

This is the bolt through higher security version of the AT1 OV

Not Handed - Reversible External Plate

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information

To reinforce a wooden door frame fitted with a surface mounted rim lock or nightlatch. Traditional wooden door frames will splinter and split open during a forced attack. A burglary victim, following a 'kick in' attack, would often find that the door frame and rim lock security had not been able to resist the attack and had failed. To counter this problem, the police and other crime prevention specialists very highly recommend the London Bar to strengthen and reinforce the door frame and fit over the rim lock or cylinder nightlatch. It is easy to fit, is used with existing locks and provides extremely effective additional security every time the door is closed and locked. packet of 2 1/2" long, No. 10 hardened steel woodscrews is supplied. The Kickstop London Bar is a door frame reinforcing solid steel bar with a 'D' shaped staple to fit over the staple (keep) of a surface fitted rim lock or cylinder nightlatch. This very effective steel anti-burglary device is screwed on to the internal face of the lock side of the frame and will resist the kicking, splitting and forcing open of the door5mm thick solid steel bar with a rounded edge and countersunk holes24" (610mm), 72" (1830mm) or 78" (1980mm) long5/8" (16mm) or 3/4" (20mm) wideStandard (30x70mm) , Large (30x97mm), Extra Large (40x105mm), Universal (30x70-97mm) or Ingersoll SC71 (modified 30x70mm) staple sizeNB: The staple of the London Bar (the 'D' shaped part) is available in three main sizes. Standard, Large and Extra Large. The purchaser must be aware that there are 100's of rim lock and nightlatch staple shapes and sizes in use in and the London Bar Staple is only designed to fit over the lock staple and is not designed to provide a contour hugging tight fit.NB: The London Bar staple has to fit OVER the surface mounted rim lock staple (keep) - the part of the rim lock that is screwed onto the frame. Take correct measurements in order to choose the appropriate London Bar staple size and avoid one that is too small.The Universal size staple is designed for customers who are not sure whether to purchase a Standard or Large size. A traditional Style Standard Yale 77 Nightlatch is shown for illustration purposes only The Staple (or the keep) is the metal part of the rim lock or nightlatch that is screwed onto the door frame 9612 & 9613 Ingersoll StapleThis is a 'handed' 30mm x 70mm London Bar staple used with the Ingersoll SC71 rim lock.It will fit over the lock staple and has a small cut out section to allow the springbolt of the lock to pass through.The product code 9612 is for a 'left handed' fitting and the 9613 is for a 'right handed' fitting.NB: From inside the property on an inward opening door - a 'right hand fitting' is where the lock is fitted on the left hand side. The door would then be unlocked and opened inwards - using the right hand. An Ingersoll SC71 Nightlatch is shown for illustration purposes only NB: Rim locks and nightlatches are fitted at slightly different heights on individual doors. When fitting the 72" and 78" length London Bars, a little of the top or the bottom of the London Bar will probably need to be removed when fitting. The surplus can be cut off with a hacksaw.The 'D' shaped bend in the two longer London Bars is positioned at the approximate height of where most surface mounted nightlatches should normally be fitted.The 72" bar is approximately 6" shorter than the height of a door frame - to help avoid the need to hacksaw off a piece of the bar if Tower bolts, other sliding bolts or fittings are fitted at top or bottom.

Kickstop Anti-ThrustGuard - 2025

Product Code: 2025
Discount Applied Automatically
Add to cart
  • Description

  • Code 2025
  • Two Steel Plates with UNIVERSAL KEYWAY
  • 100mm & 75mm wide
  • For Mortice Sashlock
  • To Overlap and cover gap between Door and Frame
  • Increased Security - For Outward Opening Doors

2025 plate dimensions - 240mm long x 100/75mm wide x 3mm thick + four security bolts

This is the bolt through higher security version of the AT5

Not Handed - Reversible Plates

NB: If you are unsure about the suitability of this product - we suggest you look at More Information

More Information