BUY StapleGuard

kickstop_door_p2ks

Kickstop Stapleguard to reinforce door frame around rim lock or nightlatch

 

 

The Kickstop StapleGuard was originally known as the London Frame Reinforcer.

  • It is a short version of the London Bar.  The difference being that the two StapleGuard plates bolt together through the frame using four security bolts whereas the London Bar is screwed on.
  • It is very strong indeed and resists forced entry by strengthening the door frame around the staple (keep) of a cylinder nightlatch or rim lock.
  • The StapleGuard is available in three sizes, three polyester powder coated architectural finishes and one polished and brass plated finish.
  • The Kickstop StapleGuard offers superior protection and resistance against kick-in attacks and forced entry
  • Supplied with security bolts and fitting instructions

 

Before ordering

Very carefully check that the StapleGuard staple size that you order, is the correct size that you need to fit over the door's nightlatch or rim lock staple.

If in doubt, please read the section on London Bar

An enlarged drawing to illustrate the fitting of a StapleGuard - click here.

 

 

  • Universal size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • White Colour
  • A four bolt steel StapleGuard for most sizes of staple
  • 20mm wide
  • Bolt through version of the London Bar
  • To Reinforce and Strengthen Wooden Door Frame

The fixings allow the internal size of the staple to be 'reduced' from 97 to 70mm.  Perfect for customers who are unsure whether to purchase a Standard or Large size staple

  • Standard size 'D' shape staple to fit over lock staple/keep which is 30mm x 70mm - or less
  • A four bolt StapleGuard for smaller sizes of staple
  • 20mm wide
  • Bolt through version of the London Bar
  • To Reinforce and Strengthen Wooden Door Frame
  • Large size 'D' shape staple to fit over lock staple/keep which is 30mm x 97mm - or less
  • A four bolt StapleGuard for larger sizes of lock staple
  • 20mm wide
  • Bolt through version of the London Bar
  • To Reinforce and Strengthen Wooden Door Frame
  • A four bolt StapleGuard to fit over the Ingersoll SC71 rim lock.  The 9605 staple has a cut out to allow the Springbolt of the lock to pass through - not illustrated **
  • 20mm wide
  • It is not 'handed' and can be fitted on the left or right side of the door frame.
  • Bolt through version of the 9612/9613 London Bar
  • To Reinforce and Strengthen Wooden Door Frame

9604 plate dimensions

300mm long x 20mm wide x 7mm thick -

Bevelled Edge

** Modified version of the Standard Staple to fit over lock staple/keep which is 30mm x 70mm - or less