BUY SashlockGuard

kickstop_door_p5sl

 

 

 

As the description implies, a mortice lock is morticed into the door.

Choosing and fitting a LockGuard to a door fitted with a 'standard' mortice deadlock is relatively straightforward and Kickstop supplies the largest selection of DeadlockGuards available for this purpose.

A sashlock however, generally requires more wood to be removed than a deadlock and has an additional hole drilled through the door for the lock spindle to pass through.

Kickstop's unique SashlockGuard has reversible offset plates to allow fitting even if the frame has wider door stops and draught excluder.

The elongated apertures in the SashlockGuard plates are designed to accommodate the spindle and keyway/cylinder of most sashlocks.

 

 

Use with existing lever lock furniture as shown in the enlarged illustration

 

  

Fitting a mortice sashlock, or deadlock, involves removing wood from the door

This leaves a very weakened area around the mortice lock

The Kickstop Door Reinforcer will help remedy this problem

 

The Kickstop LockGuards

The SashlockGuard is for use with a mortice sashlock 

The DeadlockGuard is for use with a mortice deadlock

Mortice sashlock - for illustration purposes only 

  • A Universal - steel Lock Guard for Mortice Sashlock
  • 75mm wide
  • For UK Keyway, EURO and OVAL Profile Cylinder
  • To Reinforce and Strengthen Wooden Door

Backset: 27mm minimum - 47mm maximum

Centres: 30mm minimum - 92mm maximum