Door Reinforcers Information

kickstop_door_p5

 

To reinforce a door against kick-in attack

 

Fitting a mortice deadlock, or sashlock, involves removing wood from the door

This leaves a very weakened area around the mortice lock

The Kickstop Door Reinforcer will help remedy this problem

 

The Kickstop Lockguards

The DeadlockGuard is for use with a mortice deadlock

The SashlockGuard is for use with a mortice sashlock 

 

  

A Kickstop Door Reinforcer is used to reinforce and strengthen a wooden door around a traditional UK lever, euro profile or oval profile cylinder mortice lock.

Fitting a mortice deadlock, or sashlock involves removing wood and this leaves a very weakened area around the mortice lock.  The LockGuard plates are bolted together through the door - to resist a 'kick-in' attack and so help avoid a burglary.

The 2001 HingeGuard product has no keyway and is designed to strengthen the door adjacent to the hinges, any other weakened part of the door or as a bolted through 'blanking off' plate.

Kickstop has Door Reinforcers in many colours and finishes for UK, Euro Profile and Oval Profile cylinder mortice deadlocks and sashlocks.

 

Mortice sashlock shown - for illustration purposes only

 

Before ordering

*Very carefully check the type of keyway you require

Traditional UK (UK) - Euro profile cylinder (EU) - Oval cylinder (OV)

 

 

 

 

 

 

UK

(for traditional lever/detainer mortice deadlock)

 

EU

(for Euro Profile cylinder mortice deadlock)

OV

(for Oval Profile cylinder mortice deadlock)

 Mortice deadlocks, Euro and Oval cylinders shown - for illustration purposes only

 

 Euro Profile Cylinder

Oval Profile Cylinder 

 

 

 

9600UK DeadlockGuard

for Mortice Deadlock

188 x 35 x 7mm

9600EU DeadlockGuard

for Mortice Deadlock

188 x 35 x 7mm

9600OV DeadlockGuard

for Mortice Deadlock

188 x 35 x 7mm

 

 

 

 

2000UK DeadlockGuard

for Mortice Deadlock

203 x 50 x 3mm

2000EU DeadlockGuard

for Mortice Deadlock

203 x 50 x 3mm

2000OV DeadlockGuard

for Mortice Deadlock

203 x 50 x 3mm

 

 

 

 

9601UK DeadlockGuard

for Mortice Deadlock

300 x 35 x 7mm

9601EU DeadlockGuard

for Mortice Deadlock

300 x 35 x 7mm

9601OV DeadlockGuard

for Mortice Deadlock

300 x 29 x 7mm

 

 

 

9619 SashlockGuard

For Mortice Sashlock

240 x 75 x 3mm

The top elongated hole is for the spindle

The lower 'universal' hole is for the UK keyway,

Euro cylinder or Oval cylinder.

To be used with customers own lever lock furniture

2001 HingeGuard

For Hinge on Door

203 x 50 x 3mm

For use where a much higher level

of additional security is required

 

  • Product code 9600: - 188 x 35 x 7mm - bevelled edge to resist side impact - all keyways.
  • Product code 2000: - 203 x 50 x 3mm - flat plates - all keyways.
  • Product code 2300: - 230 x 50 x 5mm - flat plates - for UK and Euro
  • Product code 9601: - 300 x 29 x 7mm - bevelled edge to resist side impact - all keyways.
  • Product code 9601: - 300 x 35 x 7mm - bevelled edge to resist side impact - all keyways.
  • Product code 9619: - 240 x 75 x 3mm - reversible flat offset plates - universal keyway - for UK, Euro or Oval
  • 9619 Backset: 27mm Minimum - 47mm Maximum
  • 9619 Centres: 30mm Minimum - 92mm Maximum.
  • Product code 2001: - 203 x 50 x 3mm - flat plates - no keyway.

  

Illustration showing how 9601 DeadlockGuard is fitted to door

 

BUY DeadlockGuard

 

Tel: 01536 790999    Fax: 01536 790710    E-mail: info@doorguard.co.uk

 

Online B2B shop powered by Security Matters